Am creat acest blog pentru ca sunt dornic sa-mi vedeti experimentele, sa invatati din ele. Acest blog ma caracterizeaza pe mine, si imi este mai usor sa dau un link de blog la cineva care vrea sa stie cum sunt decat sa-i explic.
Veti afla multe chestii legate de DIY(do it youself)&Experimente.
Hey all, I found a cool method to build a speaker ! Just search after “kipkay” on youtube, you’ll surely find it
And it’s quite cool too. This is what I did :
Made a coil on some scrap paper
Glued the coil on the plastic plate
Built some suspensions from scrap paper which will sustain the plate and coil
Put some magnets in the center of this coil while allowing it to move freely vertically
The result wasn’t as I was expecting, and I immediatly noticed the problem : the coil has a low resistance , meaning that it lacks of wire.
Well, anyway it had sound and also at full bass the plate was moving up and down, cool . At some point the coil began smoking. Here are some pictures and a video(smoking) with it :
Am incercat sa fac un motor dintr-o bucata de sarma, magnet , curent electric desigur si niste agrafe de birou. E cam fail, dar macar am reusit sa-l fac sa se invarta.
Dupa ce fac rost de un magnet cilindric incerc sa fac un motoras calumea ( e doar pentru amuzament, am eu destule motorase acasa ). O sa ma mai documentez . Chestia asta functioneaza prin inductie magnetica ? ( de aia o sa ma documentez )
. At some point the coil began smoking. Here are some pictures and a video(smoking) with it :
